Belt Pulley on Fote Gypsum Briquetting Machines

During the working process, belt pulley on desulfurization gypsum briquette machine plays an important role. If there is something wrong with the belt pulley, work of desulfurization gypsum briquetting machine will be problematic. Belt pulley is easy to be damaged, since it is always exposed to air. Therefore, we should take some measures to protect the belt pulley. With regard to the protection, there exist some common mistakes. The following content will discuss about them one by one.

The first mistake is tighter the belt, greater the working efficiency. While, the belt for transmission should not be too tight. Or else, the belt is easy to be deformed. More seriously, bearing will be damaged. For the machine oil, the mistake is the more, the better. While, the machine oil should not be too much. Or else, bent axle and handrail of desulfurization gypsum briquette machine will be agitated seriously during the working process. More seriously, you have to bear the great loss of powers and serious waste of machine oil.

For the third mistake, it refers to the phenomenon that tighter the bolts, greater the working efficiency. There are many fasteners on desulfurization gypsum briquetting machine. For the pre-tightening force of fasteners, it should be sufficient, but not excessive. If screws are excessively tightened, they will be deformed for ever. Besides, their pre-tightening force will be lowered. As long as we clearly know the above three common mistakes and reasonably avoid them, the service life of belt pulley will be significantly prolonged.

Interested in the price of gypsum briquetting machine? Leave messages on website to get the discounts.