Fluorite Powder Briquette Machine

Introduction to Fote fluorite powder briquette machine

The fluorite power or the fluorite ore is mainly used as the steel making dissolving agent. As the government starts to be strict about the management of the mine exploitation, it's more and more difficult to exploit the scarce fluorite ore.

Therefore, the stacking and spare fluorite powder starts to be applied to replace the minerals. Since powder materials are not easy for transportation and application in the steel plants, they should be first briquetted into ball products. The fluorite powder briquette machine or fluorite powder briquetting machine is invented for this purpose.

Advantages of Fote fluorite powder briquette machine

The fluorite powder briquetting machine which is familiar with the coal briquette machine and desulfurization gypsum briquette machine can briquette materials including fluorite powder, ore powder, metal powder, coal powder, coke powder etc. With the strong pressing force of its double rollers, the fluorite powder briquette machine can make products with features of high density, high strength and high hardness. The press roll of the fluorite powder briquetting machine is made of 650mn hard and wear-resisting materials, which prolongs its service life.

Installation and test-run of Fote fluorite powder briquette machine

1. The main body of the fluorite briquette machine should be vertical to the level. 2. The fluorite powder briquetting machine should be installed on the horizontal concrete pedestal and be bolted by the foot bolts. 3. After installing the fluorite briquetting machine, users should check whether the bolts are loose or the door is fastened. 4. Check the condition of the fluorite powder briquette machine's power configuration, power wire and control switch. 5. After all the inspection, users can test run the fluorite powder briquetting machine with no load. Once the test run goes well, we can start the normal production.

Material requirement for Fote fluorite powder briquette machine

1. Materials particle sizes are within 80-200mesh. 2. No metal is allowed to appear among the materials, or it will damage the fluorite powder briquette machine's roller surface. 3. Enough feed can guarantee the briquetting efficiency. Notice: The briquetting process will result in serious abrasion to the roller skin of the fluorite powder briquette machine, so users should pay much attention to the making materials of the fluorite powder briquetting machine. We prefer those machines made of wear resisting alloy.

Technical Data of Fluorite Powder Briquette Machine